The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Le Mans 1 Le Mans 2 Le Mans 3 Brakes

Sort by Title

Sort by Price

Page 3 of 10

1 2 3 4 5 6 7 8 9 10

Automatic Bleed Valve M6 Bleed Nipple

BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
M6 x 16mm

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover
More than 5 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Caliper Piston Set Brembo P08/F08

BRA11000 Fits 750S, S3, V7 Sport, 850/1000 ALL Models, Cali 1100 (1994-1997)

Dimensions:
38mm OD x 20mm

Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons

A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752

part in stock More than 5 in stock

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£35.00

INC VAT

£29.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Brembo Brake Pads P08/F08

BRA28601 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T3, T4, T5, Cali 2, Cali 3, Spada ALL, G5, Mille GT, 1000S, Strada 1000, Cali 1100 (1994-1997), Convert, 1000 SP, V7 Sport, 750S, S3, 850 GT, 850T

Dimensions:
56mm x 54mm x 9mm overall

Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

part in stock More than 5 in stock

28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£31.50

INC VAT

£26.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake caliper Mounting Shim 0.5mm

BRA95332 Fits G5, Convert, Cali 2, Cali 3, Cali 1100 (1994-1997), Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Spada ALL, T3, T4, T5, Mille GT, V7 Sport, S3, 750S, 850T

Dimensions:
.5mm thickness

Caliper mounting shim, used to precisely centre caliper over brake disc

part in stock More than 5 in stock

95100332 GU95100332 95 10 03 32
9510 0332 9510.0332 95.10.03.32

£1.20

INC VAT

£1.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Rubber Cover 90 Degree

ELA12735 Fits V35 ALL, V50 ALL, V65 ALL, 750 SP, 750 Targa, Strada 750, 850/1000 ALL Models

Rubber brakelight switch cover, 90 Degree

Also known as Guzzi ref. 10352710

part in stock More than 5 in stock

12735100-z 12735100 GU12735100 12 73 51 00
1273 5100 1273.5100 12.73.51.00

£3.20

INC VAT

£2.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake or Gear Pivot Bolt, Nut and Washer Kit Stainless Steel

SSA98660 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV

Dimensions:
M12

M12 pivot bolt kit for brake and gear lever pivots on Tonti framed models. Kit consists of 1 M12 bolt (with hex head and slotted other end), wavy washer, flat washer and half nut

Beautifully made to enhance the appearance of your bike, also cheaper than OE non stainless parts. Guzzi parts refs: 30252360, 98073660, 95100409, 92701120, 17252350. Does not fit G5

part in stock More than 5 in stock

98053660-z 98053660 GU98053660 98 05 36 60
9805 3660 9805.3660 98.05.36.60

£17.50

INC VAT

£14.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Disc Mounting Bobbin

BRA28610 Fits Cali 3, Le Mans 1000

Dimensions:
10.7mm x 22mm OD on section that locates in disc

Stainless steel brake disc mounting bobbin

part in stock 5 in stock

28613560 GU28613560 28 61 35 60
2861 3560 2861.3560 28.61.35.60

£10.50

INC VAT

£8.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Master Cylinder PS15 Brembo Rear Rebuild Kit

BRA37233 Fits V35 ALL, V50 ALL, V65 ALL, V65 Florida, Lario, 750 Targa, Strada 750, 750 SP, 750T, V75 (4 valve), V50 PA, V65 PA, V75 PA, Nevada 750 (1993-2003 series 2), Cali 2, Cali 3, Cali 1100 (1994-1997), Cali EV, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, 1000S, Mille GT, 1000 SP, SP II, Spada 3, T3, T4, T5 (1983-1988), S3

Dimensions:
Solid piston 15.84mm OD x 65mm

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement

part in stock 5 in stock

10273920 GU10273920 10 27 39 20
1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

£26.00

INC VAT

£21.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads EBC FA018

BRA54724 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T3, T4, T5, Cali 2, Cali 3, Spada ALL, G5, Mille GT, 1000S, Strada 1000, Cali 1100 (1994-1997), Convert, 1000 SP, V7 Sport, 750S, S3, 850 GT, 850T

Dimensions:
55.7 x 55 x9mm

Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

part in stock 5 in stock

28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01

£19.30

INC VAT

£16.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Fine Thread

ELA07116 Fits Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, T5, 1000S, 1000 SP, SP II, Spada 3, G5, Convert, Cali 3, Cali 1100 (1994-1997), Cali EV, Spada ALL, Mille GT, Nevada 350, Nevada 750 (1991-2003), V65 Florida, 750SP, Strada 750, 750T, 750 Targa

Dimensions:
M10 fine thread

Fine thread screw in brakelight switch for linked system proportioning valve or splitter. See ELA12735 for rubber cap

Stop light switch also known as Guzzi ref. 63657000

part in stock 5 in stock

79654116 GU79654116 79 65 41 16
7965 4116 7965.4116 79.65.41.16

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 GT/Sport Köwe, Ducati 750 Paso (1984-1992), Ducati 750 Sport, Ducati 750/900 SS Köwe, Ducati 750 F1/Laguna Seca, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR-I, Ducati 900 SS (1990), Ducati 906 Paso (1988), Ducati 1000 MHR-2/S2

£21.40

INC VAT

£17.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 3 of 10

1 2 3 4 5 6 7 8 9 10